About this item

• Wall mounted fire with an off white MDF mantel and plinth. (wall brackets supplied).
• Fireplace dimensions: W 1100mm x H 590mm x D250mm
• To meet the requirements of Eco design 2018 (Lot20), this fire is designed and manufactured to produce the optimum energy efficiency.
• The 7 days programmable remote control will turn the fire on & off and automatically switch between 1 & 2kW as the room temperature requires.
• Three flame effect options with 5 level brightness that can be enjoyed with or without the heat.
• 13 fuel bed and mood lighting options all provide a stunning display. Realistic crystals pebbles & logs included.
• MDF mantel and plinth supplied in separate pack.
• Mains cable length 1.7m (right hand side). Just plug it in and turn it on!

Product Description

Customer questions & answers

Question:Can this be used outdoors?

Answer:It isnt for outdoor use.

Question:Which part gets hot , the area where the logs are or the glass with the flames inside ?

Answer:This is essentially a fan heater, so the only heat is the air the fan blows into the room. No part of the fire gets hot , the glass is cold and the logs sit in a tray at the front of the fire. The warm air is blown from the top of the unit so the glass remains cold. Safe for pets and children hop this helps

Question:Does this come with both glass effect pebbles and logs & pebbles.

Answer:Yes. It comes with a box of logs, glass crystals and white pebbles.

Question:Hi does it have a British standard kite mark

Answer:I would think so but cannot check now as the fire is fixed on wall. Everything about it is top rate

Question:What is the recommended height from floor to hang on wall?

Answer:There is no recommended height, but you do need room to tighten fixing screws on the lower white cover, possibly 5 or 6 inches (12 to 15 cm)

Question:could this fireplace sit on a low unit instead of attached to the wall or is it not stable enough ? thanks

Answer:According to instructions, a gap of at least 200mm should be allowed between bottom of lower plinth and floor, but this is only to get to the plinth fixing screws when it is on the wall. If you fix the plinth first, it could be self standing. The air goes into the heater at the top so this wouldn't be a problem but you wouldn't be able to get to the cable storage compartment. The manufacturer's instructions specify a 200mm gap beneath the fire, so not adhering to this is your decision. 

Question:It looks white from the pictures and looking for white. Anybody able to advise on the off white colour ie is it magnolia or is it nearly white?

Answer:Very slightly off white. I wanted white but am not disappointed.